If you've got a wide door, grab a partner. Note: You may have to hold the outdoor assembly in place to keep it from falling out.

If it does slide in easily, insert the adapter until the rim is flush with your door.

If it does not slide in easily, don't force it through.

Remove the adapter from the Peephole Kit tray and from the indoor side, place the adapter over the tube and cable, then slide it towards the hole.

The adapter is needed if you have a larger peep hole opening. This film needs to be removed for motion detection and knock detection to work correctly.Ĭheck to see if you need the included adapter Note: The device ships with a thin plastic sticker over the doorbell button on the outdoor assembly to prevent scratching during shipping.

Once inserted, head inside and remove the tape from the end of the tube, if present.

From the front side of your door, insert the tube through the hole until your Peephole Cam is flush with the door.

If this isn't your forever home, consider storing the peephole in a safe place in case you have to reinstall it one day.

In the event that it doesn’t, check for paint or other obstructions around the lens.

With the indoor side removed, the outdoor portions should slide right out.

Note: You may have to secure the outdoor side of the peephole while unscrewing the indoor portion to keep it from spinning.

Once it's loose enough, you can use your fingers to finish unscrewing it and remove it completely.

On the indoor side, place the flat edge of the Peephole Key into the slots on your peephole and rotate counter-clockwise to unscrew it.

Use the toothed edge of the Peephole Key to carefully remove paint covering the edges or slots.

Check for paint on or around your peephole, both indoors and outdoors.

You may have to remove excess paint to unscrew your peephole.

The battery is fully charged when just one LED is lit (note that this may take several hours).

Plug it into a USB port using the provided orange cable (located underneath your Peephole Key).

Find it in the Peephole Cam tray, along with the adapter and tightening nut. The index holes, screw in the main body from the inside.Setting up your Ring Peephole Cam is simple.

With the outside piece held in place and its index pins dropped into.

Remove the template/sticker from the door.

Now you should drill the remainder from inside outĬaution: The two or 4 small index holes are drilled from the outsideĪnd not deeper than 1/4 inch. To achieve smooth edges at both side of the cutout, it is best to first drill from outside until the drill tip shows up on the inside.

Drill the large hole all the way through the door.Horizontal in reference to the level line given on the sticker. Sure that the label is stuck on the outside of the door and is kept On a desired place where the door viewer is to be installed. Affix the enclosed drill template/sticker.We suggest testing day and night and adjust for height. CREATING SUCH A PART NUMBER AS 'DS2000-DS238-AB' IS SOLELY INTENDED TO MISLEAD CUSTOMERS INTO THINKING THAT THEY WILL BE GETTING THE DS238 OR THE DS-2000.īefore installing, hold door viewer with your hand and test the image is satisfactory. WARNING: BE AWARE THAT A POORLY IMITATED DOOR VIEWER WITH PART# 'DS2000-DS238-AB' IS NOT THE ACTUAL DS238 NOR THE DS2000. Inmate observation in correctional facilities.Available in Black, Brass, and Silver Anodized Finishes.100% glass optical lenses unlike the DS2000.Adjusts to fit a maximum door thickness of 2' or 50mm.Watch for unexpected visitors and intruders.Say goodbye to your old peephole and stop putting yourself in harm of potential intruders.

The viewing image clearly lets you see your visitors with no visual distortion even at the edges. Featuring an ultra-wide viewing angle, the Door Scope DS238 leaves absolutely zero dead zone for unwanted guests or intruders to conceal themselves.ĭoor Scope requires no connection to a power source or battery and is a simple installation you can do yourself. When mounting this unit on any door, you will have a clear view of the outside even if standing six feet away from your door. Door Viewer / Door Scope model DS238 is an extraordinary high tech optical device that virtually replaces the conventional peep hole.

Installing a peep hole in a door